This topic describes how to control a processing blade via Ember+.

OverviewLink to Overview

Ember+ is a non-proprietary TCP/IP control protocol that allows devices to be remotely controlled via the network. It is supported by a wide range of products and manufacturers. More details about the Ember+ protocol can be found at https://github.com/Lawo/ember-plus/wiki.

To access .edge parameters via Ember+, you will need:

  • A computer that is connected to the same network as the .edge processing blades and HOME server(s).
  • A suitable Ember+ Viewer application.

Ember+ TreeLink to Ember+ Tree

The Ember+ tree is the same as the Advanced parameter tree in HOME. Thus, you can use the Advanced parameter topics as a guide.