.edge - Advanced -> SDI Outputs

The SDI Outputs pages provide access to all of the SDI output parameters. 

Operation (using HOME)

There is a separate sub-page for each SDI output and, within that, a sub-page for each feature. Most of these have been described elsewhere in this manual, so please follow the links below for more information:

• Audio Embedders - 
• Frame Synchronizer - see .edge - Frame Synchronization.
• Test Pattern - see .edge - Test Signals.
• Ident - see .edge - Test Signals.
• Audio Tone Generator - see .edge - Test Signals.
• IP Receiver - see .edge - IP Senders and Receivers.

Note that the number of SDI outputs is affected by the SDI configuration. In our example, there are 24 SDI Outs.

The screenshots below show the main page for an SDI Output and a sub-page for its video test pattern. The parameters here are identical to those in the SDI I/O tab.

SDI Outputs → SDI Out#25

SDI Outputs → SDI Out#25 → Test Pattern