This function generates an assignable fader start relay.

The assignment can be set using either a central or fader user button.

The indication button allows immediate toggling of the GPO regardless of the fader status.

The Output GPIO No defines the internal GPIO which is published automatically to HOME. In HOME, this appears as a GPI which must then be connected to a physical GPO (in HOME). This is done in a similar manner to the stream setup for a remote I/O device (described earlier).

The Consider Channel CUT option has two states:

  • Yes – if the channel mute is active, then the fader start will not trigger when the fader is opened.
  • No – the fader start always triggers when the fader opens regardless of the channel mute status.