This function defines two central user buttons that can be used to copy and paste mix levels. For example, to copy your channel levels to an aux, or copy one aux send mix to another.

Configuration

First, use the Custom Functions display to define the COPY and PASTE buttons. These can be any two central user buttons. During the configuration stage, you can choose whether the copy will include Input and/or Group channels. This will then be applied to all copy and paste operations.

Operation

Once the COPY and PASTE user buttons are defined:

  1. Place the mix you wish to copy onto your faders. For example, to copy the main channel levels, do nothing. Or to copy an aux send mix, use the FADER CONTROL panel to assign an aux mix to the faders.
  2. Press the COPY user button to copy the current fader levels - the button turns green to indicate that there are stored parameters.
  3. Now select the aux you wish to copy to using the FADER CONTROL panel - the faders update to show the selected aux mix.
  4. Press PASTE to paste the stored fader mix - the fader positions update.
  5. The copy and paste is now complete. You can paste the same mix to several auxes by repeating steps 3 and 4.

Note that the COPY button will remain green (to indicate that there is still a mix stored) unless you press COPY again (until its green LED goes out).

Once you have finished all copy and paste operations, remember to deselect the FADER CONTROL AUX button to return the faders to channel mix levels.