This function creates a "bird beater" aux - an aux send that switches off automatically when either a fader opens or an INP/GRP channel is muted.
- Start by using the Bird beater AUX field to select the aux bus you wish to use (from 1 to 128).
- Then define whether all aux send pick-up points are affected. You can choose Yes or No for each type of send: pre-fader, post-fader and pre-EQ.
- Then define whether the return mode is active.
- If the return mode is set to Yes, then the aux send will switch back on again when the fader is closed or INP/GRP channel is unmuted.