The Extra Buttons display contains additional functions that may be useful.

It can be opened on the Central GUI in a number of ways:

Each function is described elsewhere in this manual, so please follow the links below for more information.

  • Meter INP. PF, etc. – selects the meter pick-up point for the channel in access.
  • Delay MODE – sets the delay time mode for the channel in access. Keep pressing to cycle through the available options: milliseconds, frames and meters.
  • Channel REC and ALL – are not supported by A__UHD Core systems.
  • Lock ACC - protects the channel in access.
  • Lock ASN - locks the STRIP ASSIGNMENT and BUS ASSIGNMENT buttons.
  • MODULE LINK and LINK OFFSET - can be used to create and offset a link group.
  • COUPLE - can be used to create a couple.
  • Module Iso – can be used to isolate different channel modules from a snapshot recall.
  • Strip Control/View FC – sets whether the Free Control displays on the fader strips show the control functions (e.g. Aux 5), values (e.g. +4dB) or follow the touch-sense (control/value).
  • Aux 1-8 – change the aux send pick-up points. Eight aux sends are displayed at a time. The displayed sends follow the Aux paging on the surface (from the Central Control Section).