HOME Timecode Generator - Senders

The 'Device → Senders' page displays information relating to the Video, Audio and Metadata senders provided by the app.

From here you can check information about a sender, and select a sender to access its more advanced options: I/O Routing (for the audio streams), the stream configuration parameters, SDP data and Disable/Enable controls.

Available Senders (TX)

A HOME Timecode Generator can be configured with up to 8 output senders that correspond to the app's outputs as follows:

TX 1 = Timecode Generator Output 1
TX 2 = Timecode Generator Output 2
...
TX 8 = Timecode Generator Output 8

When considering the app's configuration, the Number of Output Streams define how many output senders are provisioned. Note that each output is configured separately, and can transmit timecode via a ST 2110-40 (Meta) stream.

Once an app is configured and running, its actual senders can be checked from the Senders page:

Sender Information

The informational fields show the Label of each sender, its essence type (Meta) and other information such as whether dual-redundant streaming is configured. The fields have the same meaning for all app types, and are described in HOME Apps - Senders and Receivers.

Sender Operations

Once a sender is selected, the user can access and edit its more advanced options. For example, to adjust the stream configuration parameters, SDP data and Disable/Enable controls:

Parameters - see HOME Apps - Edit Sender or Receiver and HOME Apps - Sender Parameters.
SDP Data - see HOME Apps - SDP Data.
Disable (or Enable) - allows the user to disable, and re-enable individual senders. Disabling a sender may be helpful for debugging purposes.

Note that, for a HOME Timecode Generator, although the I/O Routing option can be selected, this page performs no function as this app does not support Audio.

Advanced page parameters

Further controls are available via the Advanced parameters page. See HOME Timecode Generator - Advanced -> Senders.