This topic describes how to install and activate the software license(s).

Overview

The system requires two licenses: one for VisTool and one for Power Core.

The "VisTool RP" license (VISRP) can be installed into a local container (on your host PC), a remote container (on a networked server), or onto a USB dongle (for portability). If you wish to use a dongle, then this must be ordered separately.

For customers using beta versions of VisTool RP or VisTool RP with an open configuration, you will need the VisTool MK2 Sapphire Unlimited license and the VisTool MK2 AddOn Ember+/Logic addon license.


For Power Core RP v2, the "AP IO Node" license (APION) must be installed onto a USB memory stick that is connected to the front panel DONGLE port. A specially-configured USB memory stick is supplied for this purpose.

In both cases, the licenses are activated using the CodeMeter Runtime licensing system from WIBU systems. The license codes can be found on the delivery note shipped with the system.

About the Dongles

All dongles are specially-configured USB memory sticks that must be purchased from either Lawo or WIBU systems.

The dongles supplied for software and hardware products ship with different file systems, so it is important not to mix up the dongle types.

If you have purchased a dongle for a Lawo software application such as VisTool, then this will have a metal "LAWO logo" tag attached as shown below. Multiple software products can be licensed from a single dongle. 

USB dongle for Lawo software

The dongle supplied for hardware products such as Power Core are stand-alone (with no metal tag).

Preparing for Activation

To activate a license, you will need:

  • A PC with an internet connection (and USB port if using a dongle). If your PC does not have an internet connection, then the offline activation method can be used. The PC must be installed with CodeMeter Runtime (as described below).
  • The WIBU systems USB memory stick (if using a dongle).
  • The license code. This can be found on the delivery note shipped with the system.


Installing CodeMeter Runtime

To activate a license, your PC must be installed with CodeMeter Runtime (from WIBU systems). The correct version is installed automatically with the setup software for your product. You can check the installation by looking in the Windows taskbar where you should see the following icon.


This shows that a Cm container (for local license storage) has been installed.

Activating a License Online

To use this method, your PC must have an internet connection. If this is not possible, then the offline activation method can be used. 

When installing onto a dongle, the dongle must be connected to the PC's USB port.

1.    Open the Lawo licensing web page at https://licenseportal.lawo.com

TIP: You can change the language using the drop-down menu at the top right of the page.

2.    Copy your license ticket number into the 'Ticket' field and select Next.

The license code can be found on the delivery note shipped with the system. It takes the form of a 25-digit ticket number such as the one shown below.

3.    The WebDepot searches for and displays your licenses. Select Activate Licenses to continue.

4.    At the next page, select the storage method for your license.

There are two possibilities:

  • CmDongle - to create a USB dongle.
  • CmActLicense - to bind the license to the local computer.

5.    At the next page, select the licenses you wish to activate and the CmContainer to be used for the license storage.

You can store multiple licenses in the same container. If no Cm containers are available, then you will see an option to "Get CmContainer automatically".

6.    Click on Activate Selected Licenses Now and wait for a few seconds.

A confirmation message appears once the activation is successful.

7.    After selecting OK, a summary appears.

8.    You can now close the browser and return to your Lawo software application or install the USB dongle.


Once activated, it is strongly recommended that you backup your licenses (using the CodeMeter Web Admin portal). This will allow you to restore a license if the original is lost or damaged.

Installing the License Dongle

Once the Power Core RP v2 license(s) are activated, it is time to connect the USB memory stick to the DONGLE port. This is located on the front panel (next to the STATUS LED).

If the optional safety cap is fitted, you will need a T10 star tool to remove and replace the cap.

After inserting the license dongle, the device automatically reboots and loads the appropriate settings.

Further Information

The licensing system supports a number of other features including re-hosting a license, offline activation, backup/restore and using a license server. These are described in the "Licensing" documentation, see License Activation.

Next Steps

Once you have completed the steps above, the system is ready to install ON-AIR Designer.