The Virtual Extension is optional and can be integrated into the frame or delivered as a stand-alone unit. It provides visual feedback and parameter control. The functionality is defined by the configuration.

If the Virtual Extension is integrated, then the VX module slots directly into the frame at a fixed viewing angle. If the integration is not included, then similar functionality can be achieved by running the Desktop App on an external display.

The VX modules are available in both light and dark editions (to match the frame). The example below shows how a 14-fader crystal surface can be created from two VX frames.

Host PC Requirements

The VX software runs on a Windows PC that must be supplied by the customer. A license to run the standard configuration (for the Virtual Extension or Desktop App) is included with every console.

A single host PC can support multiple displays, depending on its specification. If you wish to run more than 6 displays (e.g. for Power Core MAX), then it is recommended to install a second host PC. The following document contains more information about the PC requirements: Vistool PC Configuration Guide.pdf.

Physical Connections

Each VX module is powered by its own external DC power supply (of the same type as the crystal frame).

The host PC connects to Power Core via the IP network and to each VX module via Display Port and USB. To connect more than one VX module, the host PC must support multiple Display Port and USB connections.

For more information about how to connect and setup the VX display, see crystal - Configuring the Virtual Extension.

Ordering Information

There are two versions of the VX module (to match the finish of the crystal frame):

  • crystal VX Module Light: 711/30
  • crystal VX Module Dark: 711/30-D

Please note: The part numbers specify the module only. The crystal frame must be ordered separately.

The modules can be fitted to any of the VX frame types described earlier. Frames ordered with the Virtual Extension integration come with special side profiles to accept the VX module.

There is no difference, technically, between the light and dark versions and so they may be exchanged (if required).

VX Module Specification

VX Module Light (711/30)

  • 1 x 13.3" touch-screen display
  • Full HD, 1920 x 1080 resolution
  • Anti-reflective surface
  • Industrial Grade Components
  • Dimensions: 336mm (w) x 226mm (d)

VX Module Dark (711/30-D)

  • as for 711/30 with dark finish.

Virtual Extension Stand Alone

The Virtual Extension can also be ordered as a stand-alone unit. This is a single screen in its own frame/housing. The stand-alone unit is available in light finish (only) and can be used with any VisTool product.

  • Virtual Extension Stand Alone: 711/33