vsmServer Dell R350

Minimal Specifications - Standard Server 

Server

Dell PowerEdge R350

CPU

Base clock >3GHz

RAID

Dedicated RAID1 controller

RAM

min. 16 GB

Harddrive

2x min. 300 GB

PSU

Dual, Hot-Plug, redundant Power Supply (1+1) 600W / 700W

OS

Windows Server 2022 EN/DE Standard

vsmServer ISO image based on Windows Server® 2022 can be provided upon request.




vsmServer Dell R350

Detailed Specifications - Standard Server

Server

1

Dell PowerEdge R350

Measures


Height – 42.8 mm (1.69 inches) Width – 482 mm (18.98 inches) Depth – 585.3 mm (23.04 inches) without bezel and 598.94 mm (23.58 inches) with bezel

CPU

1

Intel Xeon E-2388G 3,2 GHz, 16 MB Cache, 8C/16T, Turbo (95 W), 3.200 MT/s

Memory

1

16 GB UDIMM, 3.200 MT/s, ECC

Storage

2

480 GB SATA-SSD, performance optimized, 6 Gbit/s; 512 2,5""-Hot-Plug-AG-Drive, 3,5""- HYB CARR, 1 DWPD

Board

1

PowerEdge R350 Motherboard with Broadcom 5720 Dual Port 1Gb On-Board LOM V3, Ti

RAID Controller

1

Dedicated RAID1 controller

PSU

1

Dual, Hot-Plug, redundant Power Supply (1+1), 700 W MM HLAC (For 200.240 V AC only) Titanium

OS

1

Windows Server 2022 Standard OS, 16 Core license, Multi Language

Front

1

Standard Bezel

Rack Kit

1

ReadyRails Sliding Rails with Cable Management Arm

Current standard vsmServer hardware as shipped by Lawo.

vsmServer ISO image based on Windows Server® 2022 can be provided upon request.


Older Specifications can be found here:


Service Specifications

General Service Issues

VSM servers, when provided through Lawo, will come with 12 months Service package. The service package is valid worldwide through regional DELL service teams, which can be identified centrally through the DELL website. Based on the geographic region, slight differences in the service process may apply. For regional detail, please check the support status of your HOME Dell Server at https://www.dell.com/support/ using the EMC service tag number of your machine. In case of issues, please get in contact with DELL PRO SUPPORT directly. A telephone number for your region is available through the DELL Support page. For EMEA, call ✆ +49 (0)69 / 9792 - 2064. Please consider an ownership transfer to straighten regional communication with DELL in case of issues.

Ownership Transfer

When you are getting in touch with the DELL Pro Support, DELL may request you to register as the new owner of the DELL servers. Please consider an ownership transfer to straighten communication with DELL. Especially, when servers change their original location (Lawo 's origin is Germany) a ownership transfer is recommended. This ensures that you get direct access to your regional DELL Service and that the support level for the server matches with regional capabilities. After an ownership transfer, you be able to perform service enhancements affecting your machine(s), such as purchasing iDrac licenses. Ownership transfers can be initiated between you and DELL directly. A detailed guide can be found here: https://www.dell.com/support/kbdoc/en-uk/000125103/ownership-transfer-and-dell-product-registration-guides. Please use Lawo's headquarter address in Germany as detail of the current owner.



PC Workstation

 The latest recommended specifications for a vsmPanel client workstation are:

Setup

Workstation Client

CPU

min. Intel Core i5 or higher

RAM

Min. 4GB

Graphics

Min. Intel HD Graphics 4000 or higher

OS

Windows10/ Windows11 (64bit)

vsmPanel Version

3.x

A vsmPanel PC Workstation cannot be purchased from Lawo.

OS Patches and Updates

The customer is responsible to keep the workstation OS up to date. OS patches and updates should be installed when available. As some patches and updates require the system to restart, make sure to schedule downtimes properly.

OS Upgrades may cause incompatibilities. Before planning an upgrade, please make sure to check if vsmPanel is compatible with the upgrade version.

It is strongly recommended to install all Windows OS updates before doing a vsmPanel update or upgrade.