The Settings → HOME dialog can be used to define a network connection to a HOME system.

There are two fields (to define the HOME server IP settings) and a button to Connect or Disconnect from HOME.

HOME Server AddressLink to HOME Server Address

This field defines the IP address of the HOME system.

HOME Server PortLink to HOME Server Port

This field cannot be edited and is for information only. It shows the port number used by the HOME system server(s).

Connect (or Disconnect)Link to Connect (or Disconnect)

After an IP address has been entered, you can use this button to Connect (or Disconnect) Lawo VSC from the HOME system.

Connection Status & DiagnosticsLink to Connection Status & Diagnostics

The currents status of the connection to HOME is displayed under the Connect/Disconnect buttons. There are two possible states: Connected or Disconnected.

If you click on the triangle (reveal) icon, then additional information is displayed about the network connection to HOME. This can be useful for diagnostic purposes.

An example with a valid connection to HOME is shown below.