Driver implemented in: vsmStudio
Content
Summary
This document provides information about the (...) protocol implementation for VSM.
| Status of Driver | |
|---|
| Component for Driver | |
|---|
| Release (Build) of Component |
|
|---|
| Revision of Implementation | vsmStudio B2366 |
|---|
| Name/Type of 3rd Party API |
|
|---|
| Version of 3rd Party API |
|
|---|
| Additional 3rd Party information |
|
|---|
Connection
| Connection Type | TCP/ IP |
|---|
| Default Port | tbd |
|---|
Supported Features
Supported Commands
| Command 1 |
|
|---|
| Command 2 |
|
|---|
| Command 3 |
|
|---|
| Command 4 |
|
|---|
Configuration Details
Create the desired Communication Port (1) via the Manage Communication Ports view.
Start the setup of the desired Communication Port (1). Proceed with Next (2).
Proceed with New Port (1).
Set a Description name (1), Type of Port (2), Remote IP Address of the device (3) and the respective Control Port ID. The Port ID may be defined on the device side, set the Port number accordingly in vsmStudio (4). Proceed with OK (5).
In the following window, select the respective Port entry (1) and confirm with Finish (2).
In the Port Settings view, navigate to Label Assignment (1) and assign Signalpaths to label IDs by drag and drop from Signalpath list or Matrix View (2).
Navigate to Attributes (1) and make optional settings (2). Finalize the Port setup with OK (3).
In vsmStudio builds prior to B2323, the GPO-Base Parameter was named Base-Outputs and GPO-Size was named Outputs. After an update to a later version and reconnection to the respective device, the previously set values are automatically merged to the new parameters.
Known Issues
Related Articles
