When using matrix functions, the inputs and outputs within the Lawo system are addressed using the numbers described in the table below. Note that there are some additional numbers for Power Core (revision 3) to address the two optional RAVENNA ports: ra2 and ra3.
The matrix address is the same as the ID number shown in the 'Command -> Inputs/Outputs' lists (in the ON-AIR Designer). Hence, this can be a useful way to determine the address for an individual signal. To control crosspoints within an external matrix, please contact the manufacturer for details on their matrix addressing system.
Matrix Address | Power Core (revision 3) | Power Core (revisions 1 & 2) |
---|
1 | IO CARDS | IO CARDS |
65 |
|
|
129 | MADI 1 | MADI 1 |
193 | MADI 2 | MADI 2 |
257 | MADI 3 | MADI 3 |
321 | MADI 4 | MADI 4 |
385 | MADI SLOT 1 | MADI SLOT 1 |
449 |
|
|
513 | MADI SLOT 2 | MADI SLOT 2 |
577 |
|
|
641 | MADI SLOT 3 | MADI SLOT 3 |
705 |
|
|
769 | MADI SLOT 4 | MADI SLOT 4 |
833 |
|
|
897 | MADI SLOT 5 | MADI SLOT 5 |
961 |
|
|
1025 | MADI SLOT 6 | MADI SLOT 6 |
1089 |
|
|
1153 | MADI SLOT 7 | MADI SLOT 7 |
1217 |
|
|
1281 | MADI SLOT 8 | MADI SLOT 8 |
1345 |
|
|
1409 | RAVENNA (ra0, ra1) | RAVENNA (ra0. ra1) |
1473 |
|
|
1537 |
|
|
1601 |
|
|
1665 | LOOPBACKS | LOOPBACKS |
1729 |
|
|
1793 |
|
|
1857 |
|
|
1921 | GT | GT |
1985 |
|
|
2049 | UDP | UDP |
2113 | RAVENNA (ra2, ra3) | not applicable |
2368 |
|
|