Power Core - Ember+ Tree

This topic describes how Power Core parameters are addressed via Ember+.

Please use the links below to navigate to the required information:

Sources & Sums
Overview & Miscellaneous
RAVENNA
I/O Cards
System

In each case, the following abbreviations are used in the Ember+ provider tables:


Source/Sum Types	Protection	Enumeration Types
M = Mono	r = read only	I = Integer
S = Stereo	rw = read and write	R = Real
5.1 = 5.1 & 5.1+2		E = Enumeration
V = VCA		B = Boolean
J = R3LAY		U = UTF8
Mx = Minimix
P = ProTools

Sources & Sums

The table below describes the Ember+ paths and values for source and sum bus parameters. The enumerations (E1 to E15) are explained here.

1
1	.	1..2											Sources / Sums
1	.	1..2	.	1..n										Name					Min	Max	Type	Protect	Sources							Sums
1	.	1..2	.	1..n	.	1	.								Audio Type				0	4	E14	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	2	.								Source Class				0	4	E15	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	3	.								Fader								M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	3	.	1								Number			0	120	I	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	3	.	2								Motor db Value			-191	9	R	rw	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	3	.	3								Motor Position			0	255	I	rw	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	3	.	4								Manual dB Value			-191	9	R	rw	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	3	.	5								Manual Position			0	255	I	rw	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	4									DSP								M	S	5.1					M	S	5.1	J
1	.	1..2	.	1..n	.	4	.	1								Input							M	S	5.1
1	.	1..2	.	1..n	.	4	.	1	.	1							Gain[dB]		-30	18	I	rw	M	S	5.1
1	.	1..2	.	1..n	.	4	.	1	.	2							Mic Gain [dB]		0	70	I	rw	Mic Input
1	.	1..2	.	1..n	.	4	.	1	.	3							Back Gain [dB]		-120	9	I	rw	M	S
1	.	1..2	.	1..n	.	4	.	1	.	4							Rumble (Power Core / sapphire)		0	3	E1S	rw	Mic Input
1	.	1..2	.	1..n	.	4	.	1	.	4							Rumble (crystal)		0	1	E1C	rw	Mic Input
1	.	1..2	.	1..n	.	4	.	1	.	5							Pad		0	1	B	rw	Mic Input
1	.	1..2	.	1..n	.	4	.	1	.	6							Phantom		0	1	B	rw	Mic Input
1	.	1..2	.	1..n	.	4	.	1	.	7							Phase		0	1	B	rw	M	S
1	.	1..2	.	1..n	.	4	.	1	.	8							LR Mode		0	6	E2	rw		S
1	.	1..2	.	1..n	.	4	.	1	.	9							Pan		-12	12	I	rw	M			(no 5.1 Sums configured)
1	.	1..2	.	1..n	.	4	.	1	.	10							Balance		-12	12	I	rw		S		(no 5.1 Sums configured)
1	.	1..2	.	1..n	.	4	.	1	.	11							Basis		0	10	I	rw		S
1	.	1..2	.	1..n	.	4	.	1	.	12							Center Slope		0	1	R	rw	M			(5.1 Sums configured)
1	.	1..2	.	1..n	.	4	.	1	.	13							LFE [dB]		-120	0	I	rw	M	S	5.1	(5.1 Sums configured)
1	.	1..2	.	1..n	.	4	.	1	.	14							Surr. Pan LR		-12	12	I	rw	M	S		(5.1 Sums configured)
1	.	1..2	.	1..n	.	4	.	1	.	15							Surr. Pan FB		-12	12	I	rw	M	S		(5.1 Sums configured)
1	.	1..2	.	1..n	.	4	.	1	.	16							Channel On		0	1	B	rw	M	S	5.1
1	.	1..2	.	1..n	.	4	.	1	.	16							N-1 Gain [dB]		-30	18	I	rw	M	S	5.1
1	.	1..2	.	1..n	.	4	.	2								Equalizer							M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	1							On		0	1	B	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	2							Band 1 (filter low)						M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	2	.	1						Frequency	0	59	E3	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	2	.	2						Gain [dB]	-15	15	I	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	2	.	4						Mode	0	1	E4	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	3-5							Band 2-4 (EQ)						M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	3-5	.	1						Frequency	0	59	E3	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	3-5	.	2						Gain [dB]	-15	15	I	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	3-5	.	3						Q	0	5	E5	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	6							Band 5 (filter high)						M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	6	.	1						Frequency	0	59	E3	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	6	.	2						Gain [dB]	-15	15	I	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	2	.	6	.	4						Mode	0	1	E6	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3								Dynamics							M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	1							On		0	1	B	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	2							Corr Gain [dB]		-12	0	I	rw	M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	3							Compressor						M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	3	.	1						On	0	1	B	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	3	.	2						Threshold [dB]	-93	27	I	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	3	.	3						Ratio	0	9	E7	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	3	.	4						Attack Time	0	9	E8	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	3	.	5						Release Time	0	14	E9	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	4							Expander						M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	4	.	1						On	0	1	B	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	4	.	2						Threshold [dB]	-93	27	I	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	4	.	3						Ratio	0	9	E10	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	5							Gate						M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	5	.	1						On	0	1	B	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	5	.	2						Threshold [dB]	-93	27	I	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	5	.	3						Attack Time	0	9	E8	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	5	.	4						Release Time	0	14	E9	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	3	.	6							DeEsser						M	S
1	.	1..2	.	1..n	.	4	.	3	.	6	.	1						On	0	1	B	rw	M	S
1	.	1..2	.	1..n	.	4	.	3	.	6	.	2						Mode	0	1	E11	rw	M	S
1	.	1..2	.	1..n	.	4	.	3	.	6	.	3						Reduction	0	10	I	rw	M	S
1	.	1..2	.	1..n	.	4	.	4								AutoMix							M	S
1	.	1..2	.	1..n	.	4	.	4	.	1							On		0	1	B	rw	M	S
1	.	1..2	.	1..n	.	4	.	4	.	2							Weight [dB]		-9	9	I	rw	M	S
1	.	1..2	.	1..n	.	4	.	4	.	3							Speed		0	14	E9	rw	M	S
1	.	1..2	.	1..n	.	4	.	4	.	4							Group (crystal max 2)		1	4	I	rw	M	S
1	.	1..2	.	1..n	.	4	.	5								Limiter							M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	5	.	1							On		0	1	B	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	5	.	2							Threshold [dB]		-93	27	I	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	5	.	3							Release Time		0	14	E9	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	6								Delay							M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	6	.	1							On		0	1	B	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	6	.	2							Time (ms) (sapphire, crystal)		0	340	R	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	4	.	6	.	2							Time (ms) (Power Core)		0	5300	R	rw	M	S	5.1					M	S	5.1
1	.	1..2	.	1..n	.	5									Aux buses								M	S	5.1
1	.	1..2	.	1..n	.	5	.	1..20								Aux Name							M	S	5.1
1	.	1..2	.	1..n	.	5	.	1..20	.	1							Gain [dB]		-120	9	I	rw	M	S	5.1
1	.	1..2	.	1..n	.	5	.	1..20	.	2							State		0	2	E12	rw	M	S	5.1
1	.	1..2	.	1..n	.	6									MF Keys								M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	1-4								MF1a- MF2b							M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	1-4	.	1							Label				U	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	1-4	.	2							Key		0	1	B	rw	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	1-4	.	3							LED State						M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	1-4	.	3	.	1						Color	0	7	E13	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	1-4	.	3	.	2						Low	0	1	B	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	1-4	.	3	.	3						Blink	0	1	B	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	5-7								MF3-5 (5 Power Core / sapphire only)							M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	5-7	.	2							Key		0	1	B	rw	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	5-7	.	3							LED State						M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	5-7	.	3	.	1						Color	0	7	E13	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	5-7	.	3	.	2						Low	0	1	B	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	5-7	.	3	.	3						Blink	0	1	B	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	8-11								MF6-9 (Power Core / sapphire only)							M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	8-11	.	1							Label				U	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	8-11	.	2							Key		0	1	B	rw	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	8-11	.	3							LED State						M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	8-11	.	3	.	1						Color	0	7	E13	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	8-11	.	3	.	2						Low	0	1	B	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	6	.	8-11	.	3	.	3						Blink	0	1	B	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	7									States								M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	7	.	1								Fader Motor Start			0	1	B	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	7	.	2								Fader Manual Start			0	1	B	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	7	.	3								Fader Result Start			0	1	B	r	M	S	5.1	V	J	Mx	P	M	S	5.1	J
1	.	1..2	.	1..n	.	7	.	4								PFL1 active			0	1	B	r	M	S	5.1
1	.	1..2	.	1..n	.	8									VCA Groups								M	S	5.1	V
1	.	1..2	.	1..n	.	8	.	1								Assigned Group Number			0	8	I	rw	M	S	5.1	V
1	.	1..2	.	1..n	.	9									Labels								M	S	5.1	V	J	Mx	P
1	.	1..2	.	1..n	.	9	.	1								User Label							M	S	5.1	V	J	Mx	P
1	.	1..2	.	1..n	.	9	.	1	.	1							Line 1				U	rw	M	S	5.1	V	J	Mx	P
1	.	1..2	.	1..n	.	9	.	1	.	2							Line 2				U	rw	M	S	5.1	V	J	Mx	P
1	.	1..2	.	1..n	.	10									Insert (Power Core only)
1	.	1..2	.	1..n	.	10	.	1								Name					E	rw	M	S
1	.	1..2	.	1..n	.	10	.	2								Position					E	rw	M	S

Enumerations (Sources & Sums)

The enumerations (E1 to E15) are described below. In each case, click on a link to expand the tables.

E1S
	Mic	Rumble
	0	off
	1	40Hz
	2	80Hz
	3	140Hz

E1C
	Mic	Rumble
	0	off
	1	on

E2
	Input	LR Mode
	0	stereo
	1	r -> b
	2	side
	3
	4	l -> b
	5	mono
	6	ms -> xy


EQ	Frequency	EQ	Frequency
0	20Hz	30	630Hz
1	22Hz	31	710Hz
2	25Hz	32	800Hz
3	28Hz	33	900Hz
4	31Hz	34	1kHz
5	35Hz	35	1k12Hz
6	40Hz	36	1k25Hz
7	45Hz	37	1k4Hz
8	50Hz	38	1k6Hz
9	56Hz	39	1k8Hz
10	63Hz	40	2kHz
11	71Hz	41	2k24Hz
12	80Hz	42	2k5Hz
13	90Hz	43	2k8Hz
14	100Hz	44	3k15Hz
15	112Hz	45	3k55Hz
16	125Hz	46	4kHz
17	140Hz	47	4k5Hz
18	160Hz	48	5kHz
19	180Hz	49	5k6Hz
20	200Hz	50	6k3Hz
21	224Hz	51	7k1Hz
22	250Hz	52	8kHz
23	280Hz	53	9kHz
24	315Hz	54	10kHz
25	355Hz	55	11k2Hz
26	400Hz	56	12k5Hz
27	450Hz	57	14kHz
28	500Hz	58	16kHz
29	560Hz	59	18kHz

E4
	EQ Band 1	Mode
	0	High Pass
	1	Low Shelve

E5
	EQ Band 2-4	Q
	0	0.7
	1	1
	2	2
	3	3
	4	4
	5	5

E6
	EQ Band 5	Mode
	0	Low Pass
	1	High Shelve

E7
	Compressor	Ratio
	0	1:1
	1	1:1.12
	2	1:1.25
	3	1:1.4
	4	1:1.8
	5	1:2.4
	6	1:3.4
	7	1:5
	8	1:8
	9	1:16

E8
	Gate, Compressor	Attack Time
	0	0.16ms
	1	0.32ms
	2	0.64ms
	3	1.28ms
	4	2.56ms
	5	5.12ms
	6	10.2ms
	7	20.5ms
	8	41ms
	9	82ms

E9
	Gate, Limiter, Compressor	Release Time
	Automix	Speed
	0	10ms
	1	25ms
	2	50ms
	3	100ms
	4	200ms
	5	300ms
	6	400ms
	7	500ms
	8	600ms
	9	700ms
	10	800ms
	11	900ms
	12	1000ms
	13	2500ms
	14	5000ms

E10
	Expander	Ratio
	0	1:1
	1	1:0.9
	2	1:0.8
	3	1:0.7
	4	1:0.6
	5	1:0.5
	6	1:0.4
	7	1:0.3
	8	1:0.2
	9	1:0.1

E11
	DeEsser	Mode
	0	female
	1	male

	Aux	State
E12
	0	off
	1	pre fader
	2	post fader

E13
	LED	Color
	0	black
	1	red
	2	green
	3	yellow
	4	white
	5	blue
	6	magenta
	7	cyan

E14
	Audio	Type
	0	None
	1	Mono
	2	Stereo
	3	Surr. 5.1
	4	Surr. 5.1+2

E15
	Source	Class
	0	Audio
	1	ProTools
	2	VCA Group
	3	MiniMix
	4	R3LAY

Overview & Miscellaneous

The table below provides an overview of the Ember+ provider tree, and describes the paths and values for miscellaneous parameters. The enumerations (EM1 to EM7) are explained here.

1																Min	Max	Type	Protect
1	.	1									Sources					see Sources & Sums
1	.	2									Sums					see Sources & Sums
1	.	3									Matrices
1	.	3	.	1								System Matrix
1	.	3	.	2	.							Matrix Params
1	.	3	.	2	.	1							targets
1	.	3	.	2	.	1	.	1-n						Name
1	.	3	.	2	.	1	.	1-n	.	1					Group			U	r
1	.	3	.	2	.	1	.	1-n	.	2					Name			U	r
1	.	3	.	2	.	1	.	1-n	.	3					Type	0	6	EM1	r
1	.	3	.	2	.	1	.	1-n	.	4					Gain [dB]	-30	9	I	r
1	.	3	.	2	.	1	.	1-n	.	5					Protected	0	1	B	rw
1	.	3	.	2	.	2							sources
1	.	3	.	2	.	2	.	1-n						Name
1	.	3	.	2	.	2	.	1-n	.	1					Group			U	r
1	.	3	.	2	.	2	.	1-n	.	2					Name			U	r
1	.	3	.	2	.	2	.	1-n	.	3					Type	0	6	EM1	r
1	.	3	.	2	.	2	.	1-n	.	4					Gain [dB]	-30	9	I	rw
1	.	3	.	3								Matrix Labels
1	.	3	.	3	.	1							targets
1	.	3	.	3	.	1	.	1-n						L1 to Ln				U	r
1	.	3	.	3	.	2							sources
1	.	3	.	3	.	2	.	1-n						L1 to Ln				U	r
1	.	4									GPIOs
1	.	4	.	1-n								Name
1	.	4	.	1-n	.	1							Output Register					I	r
1	.	4	.	1-n	.	2							Output Signals
1	.	4	.	1-n	.	2	.	1-32						Name
1	.	4	.	1-n	.	2	.	1-32	.	1					State	0	1	B	r
1	.	4	.	1-n	.	3							Input Register					I	r/rw
1	.	4	.	1-n	.	4							Input Signals
1	.	4	.	1-n	.	4	.	1-32						Name
1	.	4	.	1-n	.	4	.	1-32	.	1					State	0	1	B	r/rw
1	.	5									Functions
1	.	5	.	1								ParamLoopBack				see Function Calls (Misc)
1	.	5	.	2								RampMotorFader				see Function Calls (Misc)
1	.	5	.	3								SetPFLState				see Function Calls (Misc)
1	.	6									RAVENNA (Power Core)					see RAVENNA
1	.	7									I/O Cards (Power Core)					see I/O Cards
1	.	7									GPI/O Card (Power Core)					see I/O Cards
1	.	29									System (Power Core)					see System
1	.	29									System (legacy products)
1	.	29	.	1								System Type				0	3	EM2	r
1	.	29	.	2								M2 Mode				0	3	EM3	r
1	.	29	.	3								Card Position				0	1	EM4	r
1	.	29	.	4								Card State				0	5	EM5	r
1	.	30									Identity
1	.	30	.	1								product						U	r
1	.	30	.	2								company						U	r
1	.	30	.	3								serial						U	r
1	.	30	.	4								version						U	r
1	.	30	.	5								role						U	r
1	.	31									Configuration
1	.	31	.	1								Timestamp						U	r

Enumerations (Misc)

The enumerations (EM1 to EM7) are described below. In each case, click on a link to expand the tables.

EM1	Source	Type
	0	none
	1	mono
	2	left
	3	right
	4	stereo
	5	5.1
	6	5.1+2

EM2S	System	Type
	0	Default
	1	Sapphire
	2	Nova17MK2
	3	AudioIF

EM2C	System	Type
	0	Default

EM3	System	M2 Mode
	0	Normal
	1	Standalone
	2	Isolate
	3	Unknown

EM4	System	Card Position
	0	M1
	1	M2

EM5	System	Card State
	0	Active
	1	Inactive
	2	Standalone
	3	Isolate Active
	4	Isolate Inactive
	5	Undefined

EM6	System	Sampling Rate
	0	44.1 kHz
	1	48 kHz

EM7	System	Prio Sequence
	0	PTP - MADI - WordClock
	1	PTP - WordClock - MADI
	2	MADI - PTP - WordClock
	3	MADI - WordClock - PTP
	4	WordClock - PTP - MADI
	5	WordClock - MADI - PTP

Function Calls (Misc)

The following miscellaneous functions can be called using Ember+. Click on a link to expand the instructions.

This is a test function. Entered values are looped back.


Arguments		Type	Allowed
	Boolean Par.	B	0 / 1
	Integer Par.	I	Int
	Real Par.	R	Real
	String Par.	U	String
Results
	Boolean Res.	B
	Integer Res.	I
	Real Res.	R
	String Res.	U

Moves a motorised fader to a defined gain position within a specified time.


Arguments				Type	Allowed
	Source Name			U	existing Sources / Sums
	Gain [dB]			R	-999 to +9 bounded to -191 to +9
	Time [s]			R	0 to 10 ( <0.5 = at once)
Results
	Result			I
		0	Success
		1	Incorrect number of parameters
		2	Incorrect datatype
		3	Input value out of range
		4	Source / Sum not found
		5	Source / Sum not assigned
		6	Combination of values not allowed (level difference to small / time to large)

Sets the PFL state of a source or sum.


Arguments				Type	Allowed
	Source Name			U	existing Sources / Sums
	Status			B	0 / 1
Results
	Result			I
		0	Success
		1	Incorrect number of parameters
		2	Incorrect datatype
		3
		4	Source / Sum not found
		5	Source / Sum not assigned

RAVENNA

The table below describes the Ember+ paths and values for RAVENNA parameters in Power Core. The enumerations (ER1 & ER2) are explained here.

1												Product (Power Core)
1	.	6											RAVENNA						Min	Max	Type	Protect
1	.	6	.	1										PTP
1	.	6	.	1	.	1									Configuration + Control
1	.	6	.	1	.	1	.	1								Domain			0	9	I	r
1	.	6	.	1	.	1	.	2								Prio 1			0	255	I	r
1	.	6	.	1	.	1	.	3								Prio 2			0	255	I	r
1	.	6	.	1	.	1	.	4								Master Announce Interval			0	4	I	r
1	.	6	.	1	.	1	.	5								Master Sync Interval			0	2	I	r
1	.	6	.	1	.	1	.	6								Master TTL			0	10	I	r
1	.	6	.	1	.	1	.	7								Slave only			0	1	B	r
1	.	6	.	1	.	1	.	8								Delay Mechanism			0	1	I	r
1	.	6	.	1	.	1	.	9								DSCP			0	255	I	r
1	.	6	.	1	.	1	.	10								Slave WAN Mode			0	1	B	r
1	.	6	.	1	.	2									Global Data
1	.	6	.	1	.	2	.	1								PTP Mode					U	r
1	.	6	.	1	.	2	.	2								Active Clock IP Address					U	r
1	.	6	.	1	.	2	.	3								Active Clock ID					U	r
1	.	6	.	1	.	2	.	4								Grandmaster Clock ID					U	r
1	.	6	.	1	.	3									Slave-Only Engine
1	.	6	.	1	.	3	.	1								Time Difference					U	r
1	.	6	.	1	.	3	.	2								Clock Correction Value					U	r
1	.	6	.	1	.	3	.	3								Status					U	r
1	.	6	.	1	.	3	.	4								Stability					U	r
1	.	6	.	1	.	3	.	5								Sync Interval					U	r
1	.	6	.	1	.	3	.	6								Servo Window Size					U	r
1	.	6	.	1	.	4									Master-Slave Engine
1	.	6	.	1	.	4	.	1								Status					U	r
1	.	6	.	1	.	4	.	2								Own Clock ID					U	r
1	.	6	.	2										Devices
1	.	6	.	2	.	1..2									ra0 ..1
1	.	6	.	2	.	1..2	.	1								Parameters
1	.	6	.	2	.	1..2	.	1	.	1							Hostname				U	r
1	.	6	.	2	.	1..2	.	1	.	2							IP Address				U	r
1	.	6	.	2	.	1..2	.	1	.	3							Netmask				U	r
1	.	6	.	2	.	1..2	.	1	.	4							RTSP Port		0	65535	I	r
1	.	6	.	2	.	1..2	.	1	.	5							Sample Rate		44100	48000	I	r
1	.	6	.	3										Core
1	.	6	.	3	.	1									Inputs
1	.	6	.	3	.	1	.	1..n								Ravenna Core Input name
1	.	6	.	3	.	1	.	1..n	.	1							Type		0	6	ER1	r
1	.	6	.	3	.	1	.	1..n	.	2							Devices				U	r
1	.	6	.	3	.	1	.	1..n	.	3							mDNS Channels				U	r
1	.	6	.	3	.	1	.	1..n	.	4							SAP Channels				U	r
1	.	6	.	3	.	1	.	1..n	.	5							Codec		0	4	ER2	r
1	.	6	.	3	.	1	.	1..n	.	6							Samples per Frame		0	128	I	r
1	.	6	.	3	.	1	.	1..n	.	7							Source No.		0	128	I	r
1	.	6	.	3	.	1	.	1..n	.	8							SDP				U	r
1	.	6	.	3	.	1	.	1..n	.	9							RTSP URL 0				U	r
1	.	6	.	3	.	1	.	1..n	.	10							RTSP URL 1				U	r
1	.	6	.	3	.	1	.	1..n	.	11							Active		0	1	B	rw
1	.	6	.	3	.	1	.	1..n	.	12							Stream Name				U	rw
1	.	6	.	3	.	2									Outputs
1	.	6	.	3	.	2	.	1..n								Ravenna Core Output name
1	.	6	.	3	.	2	.	1..n	.	1							Type		0	6	ER1	r
1	.	6	.	3	.	2	.	1..n	.	2							Flags				U	r
1	.	6	.	3	.	2	.	1..n	.	3							Default Stream Name				U	r
1	.	6	.	3	.	2	.	1..n	.	4							Assigned Stream Name				U	r
1	.	6	.	3	.	2	.	1..n	.	5							Destination No.		0	128	I	r
1	.	6	.	3	.	2	.	1..n	.	6							SDP				U	rw
1	.	6	.	3	.	4									Stream Destinations
1	.	6	.	3	.	4	.	1..n								Dst n
1	.	6	.	3	.	4	.	1..n	.	1							Type		0	6	ER1	r
1	.	6	.	3	.	4	.	1..n	.	2							Remote Stream No.		0		I	r
1	.	6	.	3	.	4	.	1..n	.	3							Remote Stream Name				U	r
1	.	6	.	3	.	4	.	1..n	.	4							Codec		0	4	ER2	r
1	.	6	.	3	.	4	.	1..n	.	5							Samples per Frame		0	128	I	r
1	.	6	.	3	.	4	.	1..n	.	6							Time Offset		0	32000	I	rw
1	.	6	.	3	.	4	.	1..n	.	7							Tracks				U	r
1	.	6	.	3	.	4	.	1..n	.	8(9)							Statistics primary (secondary) Device
1	.	6	.	3	.	2	.	1..n	.	8(9)	.	1						Total_packet Count	0	2147483647	I	r
1	.	6	.	3	.	2	.	1..n	.	8(9)	.	2						Early Packet Count	0	2147483647	I	r
1	.	6	.	3	.	2	.	1..n	.	8(9)	.	3						Late Packet Count	0	2147483647	I	r
1	.	6	.	3	.	2	.	1..n	.	8(9)	.	4						Misordered Packet Count	0	2147483647	I	r
1	.	6	.	3	.	2	.	1..n	.	8(9)	.	5						Buffer Margin Minimum			U	r
1	.	6	.	3	.	2	.	1..n	.	8(9)	.	6						Buffer Margin Maximum			U	r
1	.	6	.	3	.	2	.	1..n	.	8(9)	.	7						Peak Jitter	0	2048	I	r
1	.	6	.	3	.	2	.	1..n	.	10							Statistics Both Device
1	.	6	.	3	.	2	.	1..n	.	10	.	1						Timeout Count	0	2147483647	I	r
1	.	6	.	3	.	2	.	1..n	.	10	.	2						FSM State	0	8	I	r
1	.	6	.	4										Remote Nodes
1	.	6	.	4	.	1..n									Node Name
1	.	6	.	4	.	1..n	.	1								IP Address					U	r
1	.	6	.	4	.	1..n	.	2								Flags					U	r
1	.	6	.	4	.	1..n	.	3								TTL			0	240	I	r
1	.	6	.	5	.									Remote Streams
1	.	6	.	5	.	1..n									Stream Name
1	.	6	.	5	.	1..n	.	1								Type			0	6	ER1	r
1	.	6	.	5	.	1..n	.	2								Devices					U	r
1	.	6	.	5	.	1..n	.	3								mDNS Channels					U	r
1	.	6	.	5	.	1..n	.	4								SAP Channels					U	r
1	.	6	.	5	.	1..n	.	5								Flags					U	r
1	.	6	.	5	.	1..n	.	6								TTL			0	240	I	r
1	.	6	.	5	.	1..n	.	7								Codec			0	4	ER2	r
1	.	6	.	5	.	1..n	.	8								Samples per Frame			0	128	I	r
1	.	6	.	5	.	1..n	.	9								RTSP Port			0		I	r
1	.	6	.	5	.	1..n	.	10								MCast IP Address 0					U	r
1	.	6	.	5	.	1..n	.	11								MCast IP Address 1					U	r
1	.	6	.	5	.	1..n	.	12								Destination No.			0	5000	I	r
1	.	6	.	5	.	1..n	.	13								Destination Name					U	r
1	.	6	.	5	.	1..n	.	14								SDP					U	r
1	.	6	.	5	.	1..n	.	15								RTSP URI 0					U	r
1	.	6	.	5	.	1..n	.	16								RTSP URI 1					U	r
1	.	6	.	6										Timestamps
1	.	6	.	6	.	1									Node List Update Timestamp				0
1	.	6	.	6	.	2									Stream List Update Timestamp				0
1	.	6	.	7										Functions
1	.	6	.	7	.	1									Output Connect				see Function Calls (RAVENNA)
1	.	6	.	7	.	2									Remote Nodes List				see Function Calls (RAVENNA)
1	.	6	.	7	.	3									Remote Streams List				see Function Calls (RAVENNA)

Enumerations (RAVENNA)

The enumerations (ER1 & ER2) are described below. In each case, click on a link to expand the tables.

ER1	Input	Type
	0	none
	1	mono
	2	stereo
	3	surround
	4	16-channel
	5	32-channel
	6	64-channel

ER2	Input	Codec
	0	none
	1	L16
	2	L24
	3	L32
	4	AM824

Function Calls (RAVENNA)

The following RAVENNA functions can be called using Ember+. Click on a link to expand the instructions.

Connects a RAVENNA output to a stream.


Arguments				Type	Allowed
	Output No.			I	existing Output Numbers
	Remote Stream No.			I	use Number or Name
	Remote Stream Name			U	use Number or Name
Results
	Result			I
		0	Success
		1
		2
		3	Output not found

Lists the specified remote nodes.


Arguments				Type	Allowed
	Previous Node No.			I
	Name Filter			U
	From Timestamp			I
Results
	Result			I
		0	Success
		1
		2
		3
	Node Name			U
	Node No.			I
	Actual Timestamp			I

Lists the specified remote streams.


Arguments				Type	Allowed
	Previous Stream No.			I
	Stream Name Filter			U
	Node Name Filter			U
	Stream Type Filter			I
	From Timestamp			I
Results
	Result			I
		0	Success
		1
		2
		3
	Stream Name			U
	Stream No.			I
	Node No.			I
	Actual Timestamp			I

I/O Cards

The table below describes the Ember+ paths and values for I/O card parameters in Power Core. The enumerations (EIO1 to EIO3) are explained here.

1												Product (Power Core)
1	.	7											I/O Cards							Min	Max	Type	Protect
1	.	7	.	1..8										Slot No.
1	.	7	.	1..8	.	1									Card Type					0	7	EIO1	r
1	.	7	.	1..8	.	2									Parameters
1	.	7	.	1..8	.	2	.	1								Product ID						U	r
1	.	7	.	1..8	.	2	.	2								Serial Number						U	r
1	.	7	.	1..8	.	2	.	3								Hardware Revision						I	r
1	.	7	.	1..8	.	2	.	4								Firmware Version						U	r
1	.	7	.	1..8	.	2	.	5								Firmware Compile Date						U	r
1	.	7	.	1..8	.	2	.	6								Card Temperature						U
1	.	7	.	1..8	.	2	.	7								Card Temperature High Limit						U
1	.	7	.	1..8	.	2	.	10								Channels
1	.	7	.	1..8	.	2	.	10	.	1..8							Channel No.
1	.	7	.	1..8	.	2	.	10	.	1..8	.	1						Type		0	4	EIO2	r
1	.	7	.	1..8	.	2	.	10	.	1..8	.	2						Core connected				B	r
1	.	7	.	1..8	.	2	.	10	.	1..8	.	5						Mic Parameters (read only if Core connected)
1	.	7	.	1..8	.	2	.	10	.	1..8	.	5	.	1					In Gain [dB]	-30	18	I	r(w)
1	.	7	.	1..8	.	2	.	10	.	1..8	.	5	.	2					Mic Gain [dB]	0	70	C	r(w)
1	.	7	.	1..8	.	2	.	10	.	1..8	.	5	.	3					Mic Gain fixed	0	11	EIO2	r
1	.	7	.	1..8	.	2	.	10	.	1..8	.	5	.	4					Phantom			B	r(w)
1	.	7	.	1..8	.	2	.	10	.	1..8	.	5	.	5					Phantom fixed			B	r
1	.	7	.	1..8	.	2	.	10	.	1..8	.	5	.	6					Pad 20dB			B	r(w)
1	.	7	.	1..8	.	2	.	10	.	1..8	.	5	.	7					Rumble	0	3	E1S	r(w)
1	.	7	.	1..8	.	2	.	10	.	1..8	.	6						Line In Parameters
1	.	7	.	1..8	.	2	.	10	.	1..8	.	6	.	1					In Gain [dB]	-30	18	I	rw
1	.	7	.	1..8	.	2	.	10	.	1..8	.	6	.	2					Rumble	0	3	E1S	r(w)
1	.	7	.	1..8	.	2	.	10	.	1..8	.	7						Line Out Parameters
1	.	7	.	1..8	.	2	.	10	.	1..8	.	7	.	1					Out Gain [dB]	-30	18	I	rw
1	.	7	.	1..8	.	2	.	10	.	1..8	.	8						AES Parameters
1	.	7	.	1..8	.	2	.	10	.	1..8	.	8	.	1					In Gain [dB]	-30	18	I	rw
1	.	7	.	1..8	.	2	.	10	.	1..8	.	8	.	2					Out Gain [dB]	-30	18	I	rw
1	.	7	.	1..8	.	2	.	10	.	1..8	.	8	.	3					Disable SRC			B	rw
1	.	8											GPI/O Card
1	.	8	.	1..8										GPIO No.
1	.	8	.	1..8	.	1									Input					0	1	I	r
1	.	8	.	1..8	.	2									Output (read only if Core connected)					0	1	I	r(w)
1	.	8	.	1..8	.	3									Core connected (Output)					0	1	B	r

Enumerations (I/O Cards)

The enumerations (EIO1 to EIO3) are described below. In each case, click on a link to expand the tables.

EIO1	Input	Card Type
	0	none
	1	Mic / Line
	2	Line In
	3	Line Out
	4	Studio I/O
	5	AES3 In/Out
	6	MADI
	7	Type mismatch

EIO2	Input	Type
	0	none
	1	Mic
	2	Line In
	3	Line Out
	4	AES

EIO3	Input	Mic Gain fixed
	0	Off
	1	-20 dB
	2	-25 dB
	3	-30 dB
	4	-35 dB
	5	-40 dB
	6	-45 dB
	7	-50dB
	8	-55 dB
	9	-60 dB
	10	-65 dB
	11	-70 dB

System

The table below describes the Ember+ paths and values for system parameters in Power Core. The enumerations (EM1 to EM7) are explained here.

1
1	.	29							System				Min	Max	Type	Protect
1	.	29	.	1						System States (apply to legacy products; no function for Power Core)
1	.	29	.	1	.	1					System Type		0	3	EM2	r
1	.	29	.	1		2					M2 Mode		0	3	EM3	r
1	.	29	.	1		3					Card Position		0	1	EM4	r
1	.	29	.	1		4					Card State		0	5	EM5	r
1	.	29	.	2						Sampling rate + Levels (adjustable for AP I/O Node License)
1	.	29	.	2	.	1					Sampling Rate		0	1	EM6	r(w)
1	.	29	.	2	.	2					Analog Ref. Level [dBu]		12	24	I	r(w)
1	.	29	.	2	.	3					Relative System Level [dBFS]		-45	-18	I	r(w)
1	.	29	.	2	.	4					Digital Ref. Level [dBFS]		-27	0	I	r(w)
1	.	29	.	3						Sync (adjustable for AP I/O Node License)
1	.	29	.	3	.	1					Prio Sequence		0	5	EM7	r(w)
1	.	29	.	3	.	2					PTP
1	.	29	.	3	.	2	.	1				Enabled			B	r(w)
1	.	29	.	3	.	2	.	2				Present			B	r
1	.	29	.	3	.	2	.	3				Active			B	r
1	.	29	.	3	.	3					MADI
1	.	29	.	3	.	3	.	1				Enabled			B	r(w)
1	.	29	.	3	.	3	.	2				Present			B	r
1	.	29	.	3	.	3	.	3				Active			B	r
1	.	29	.	3	.	4					WordClock
1	.	29	.	3	.	4	.	1				Enabled			B	r(w)
1	.	29	.	3	.	4	.	2				Present			B	r
1	.	29	.	3	.	4	.	3				Active			B	r
1	.	29	.	3	.	5					Internal
1	.	29	.	3	.	5	.	1				Enabled			B	r(w)
1	.	29	.	3	.	5	.	2				Present			B	r
1	.	29	.	3	.	5	.	3				Active			B	r
1	.	29	.	4						Voltages
1	.	29	.	4	.	1					Main Input Voltage (12V)
1	.	29	.	4	.	1	.	1				Actual Value			U	r
1	.	29	.	4	.	1	.	2				Low Limit			U	r
1	.	29	.	4	.	1	.	3				High Limit			U	r
1	.	29	.	4	.	2					Aux Input Voltage (12V)
1	.	29	.	4	.	2	.	1				Actual Value			U	r
1	.	29	.	4	.	2	.	2				Low Limit			U	r
1	.	29	.	4	.	2	.	3				High Limit			U	r
1	.	29	.	4	.	3					Board Voltage 1 (3.3V)
1	.	29	.	4	.	3	.	1				Actual Value			U	r
1	.	29	.	4	.	3	.	2				Low Limit			U	r
1	.	29	.	4	.	3	.	3				High Limit			U	r
1	.	29	.	4	.	4					Board Voltage 2 (1.8V)
1	.	29	.	4	.	4	.	1				Actual Value			U	r
1	.	29	.	4	.	4	.	2				Low Limit			U	r
1	.	29	.	4	.	4	.	3				High Limit			U	r
1	.	29	.	4	.	5					Board Voltage 3 (1.35V)
1	.	29	.	4	.	5	.	1				Actual Value			U	r
1	.	29	.	4	.	5	.	2				Low Limit			U	r
1	.	29	.	4	.	5	.	3				High Limit			U	r
1	.	29	.	5						Currents
1	.	29	.	5	.	1					DCDC 12V Input Current
1	.	29	.	5	.	1	.	1				Actual Value			U	r
1	.	29	.	5	.	2					DCDC 3.3V Output Current
1	.	29	.	5	.	2	.	1				Actual Value			U	r
1	.	29	.	5	.	3					DCDC 0.9V Output Current
1	.	29	.	5	.	3	.	1				Actual Value			U	r
1	.	29	.	6						Temperatures
1	.	29	.	6	.	1					FPGA Chip Temperature
1	.	29	.	6	.	1	.	1				Actual Value			U	r
1	.	29	.	6	.	1	.	2				High Limit			U	r
1	.	29	.	6	.	2					Board Temperature
1	.	29	.	6	.	2	.	1				Actual Value			U	r
1	.	29	.	6	.	2	.	2				High Limit			U	r
1	.	29	.	6	.	3					Fan Temperature
1	.	29	.	6	.	3	.	1				Actual Value			U	r
1	.	29	.	6	.	3	.	2				High Limit			U	r
1	.	29	.	6	.	4					DCDC Temperature
1	.	29	.	6	.	4	.	1				Actual Value			U	r
1	.	29	.	6	.	4	.	2				High Limit			U	r
1	.	29	.	7						Fan Speeds
1	.	29	.	7	.	1					Fan 1 Speed
1	.	29	.	7	.	1	.	1				Actual Value			U	r
1	.	29	.	7	.	1	.	2				High Limit			U	r
1	.	29	.	7	.	2					Fan 2 Speed
1	.	29	.	7	.	2	.	1				Actual Value			U	r
1	.	29	.	7	.	2	.	2				High Limit			U	r
1	.	29	.	7	.	3					Fan 3 Speed
1	.	29	.	7	.	3	.	1				Actual Value			U	r
1	.	29	.	7	.	3	.	2				High Limit			U	r
1	.	29	.	7	.	4					Fan 4 Speed
1	.	29	.	7	.	4	.	1				Actual Value			U	r
1	.	29	.	7	.	4	.	2				High Limit			U	r