Each crystal frame is delivered in its own box with all included accessories. The Fader or Main module is pre-installed. For Virtual Extension frames, the VX module is shipped separately.
Please check the contents of the shipping boxes, and in the event of any transport damage, contact your local Lawo representative or email support@lawo.com.
A list of serial numbers for all components is included with the shipment. Please keep this list for your records.
Packing List
The contents of the shipment will vary depending on the component(s) ordered.
Included
The following items are included with each frame:
- 1 x desktop power supply (485-1209-000) - to power the frame.
- 1 x 2m IEC power cable (country-specific) - to connect mains to the desktop power supply.
- Printed sheet with foil-printed labels - to re-label the MF Keys.
For the Virtual Extension option, each VX module comes with the following items:
- 1 x desktop power supply (485-1209-000) - to power the VX display.
- 1 x 2m IEC power cable (country-specific) - to connect mains to the desktop power supply.
Not Included
The following items are not included and must be provided by the customer or installer:
- Ethernet cable(s) - to connect the control surface frame(s) to Power Core, either directly or via the network.
- CAN bus cable(s) - to connect additional control surface frame(s) or external KSC or GPIO panels.
For the Virtual Extension option, the following items are also required:
- Windows 64-bit host PC - to run the Lawo GUI application VisTool.
- 1 x Display Port cable - to connect the VX module to the host PC.
- 1 x USB cable - to connect the VX module to the host PC.
