This topic describes how to transfer the Waves licenses to a different PC.

There are two possible methods: transfer from Waves Central OR from the local hard drive. In both cases, the licenses are transferred to a USB key.

Transfer licenses from Waves Central to USB Key

Please note: If the Waves products are not already installed, then this procedure installs them onto the target PC.

  • Open Waves Central and go to "Install Products".
  • Select "MY PRODUCTS".
  • Select all of the products.
  • Select "Choose" under "Target for Licences".
  • Select your USB key .
  • Select "Install & Activate".
  • Waves Central now installs the Waves products onto the target PC and activates the licences in the USB key.
  • If new products are installed, you will need to restart the PC.
  • Check that the licences are transferred to the USB key in the "Licences" menu.

For more information, please see the Waves support at: https://www.waves.com/support/install-activate-products-on-offline-computers

Move licenses from Local Hard Drive to USB Key

  • Connect a suitable USB key to the Waves Axis Scope PC.
  • Open Windows Explorer by pressing the Windows Key + E.
  • Select the USB key.
  • Right click and select "Format".
  • Insert a name of your choice for "Volume label" and click on "Start".
    Please note: The USB key can also be formatted in Ex-Fat.
  • Once the formatting is finished, click on "Close".
  • Start Waves Central and click on "Licences". 

    In this example, only one license is present in Waves Central.
  • Under "CONNECTED DEVICES", select "Local Disk C".
  • Click on "Choose".
  • Click on “Deactivate”.
  • Select your USB key and click on "Activate".
  • Waves Central now moves all of the licenses onto the USB key
  • Check that the licences are transferred to the USB key in the "Licences" menu.