The Digital Amplifier (Digamp) provides an additional gain element that can be positioned at any point in the channel signal flow (using the Channel Config display).

Digamp Parameters

The Digamp parameters are:

  • On/Off
  • Gain - from -128dB to +15dB

Operation

The Digamp can be controlled (for the selected channel) from the Central Control Section or Main Display. It can also be assigned to the fader strip Free Controls, either individually (per channel) or globally (across all bays).

From the Central Control Section:

  1. Press DIG AMP to page the DIG AMP/DELAY/INSERT controls to the digital amplifier.
  2. Press ON to switch on the module (and apply the Digamp gain).
  3. Move the rotary control to adjust the gain. The amount of gain is shown on the Central GUI module pop-up window or Main Display.